www.icact.org

Member Login

TACT Journal Homepage

Call for Paper

Committee

Find My Paper

Author Homepage

Statistics & History

Welcome Message

Paper Procedure

FAQ

Paper Archives

Outstanding Papers

Program & Proceedings

Presentation Platform

Hotel & Travel Info

Photo Gallery

Scheduler Login

Seminar

Archives Login

Sponsors

Virual Oral Question and Answer


IEEE/ICACT20210195 Question.2 Questioner: ra-maneekut@kddi-research.jp 2021-02-10 오전 7:29:33	IEEE/ICACT20210195 Answer.2 Answer by Auhor rashid_zaidi@yahoo.com 2021-02-10 오전 7:29:33
Could you please explain the simulation setup briefly in order to get results in slides 12-14 ?	The following are the system parameters used for simulating the EPON-based RAN architecture: (1) a PON with 16 ONUs, each serving a varying number of BSs (a minimum of one BS to a maximum of 10 BSs), depending on the varying traffic load.; (2) aggregate access link data rate from the MSs to a given ONU is 100 Mb/s; (3) the RAN DS line rate (from the OLT/SGW(ePC) to the ONUs/BSs) is assumed to be same as the US line rate (from the ONUS/BSs to the OLT/SGW) and is equal to 1 Gb/s; (4) the average distance between the OLT/SGW(ePC) and ONS/BSs is 20 km; (5) we assume that all network traffic is just mobile traffic initiated by 5G MSs, i.e., traditional EPON’s fixed wired end-user’s traffic is assumed to be zero. For more details please refer to the paper.

Select Voice